ST8416 192kHz 8-Input Digital Audio Receiver (S/PDIF + AES3)

ST8416 192kHz 8-Input Digital Audio Receiver (S/PDIF + AES3)

ST8416

The ST8416 is a CMOS monolithic digital audio receiver/decoder IC with an 8:2 S/PDIF input multiplexer, compatible with IEC60958, S/PDIF, EIAJ CP1201 and AES3 audio interfaces over a 32kHz to 192kHz sample rate range. An integrated PLL recovers a clean clock from the AES3 data stream, with RMCK output clock jitter of only 200ps RMS typical. The serial digital audio output supports left-justified, right-justified and I²S formats with programmable bit width and clock polarities, plus an AES3 direct output format with readable V/U/C bits. Both software mode (SPI and I²C) and hardware mode (pin-configured) are supported; the VL logic interface supply works with +3.3V or +5.0V systems. Channel status data is stored in on-chip registers accessible via pins, and the device supports differential inputs, automatic compressed-audio stream detection and CD Q sub-code decoding. Housed in a TSSOP28 package over -40~+85℃, the ST8416 is widely used in A/V receivers, CD-R/DVD players, multimedia audio, digital mixing, set-top boxes and automotive audio systems.

Online inquiry

Specifications

Max Sample Rate32 kHz ~ 192 kHz (192 kHz max)
Protocols (S/PDIF+AES3)Compatible with IEC60958, S/PDIF, EIAJ CP1201, AES3 (full S/PDIF + AES3 support)
Input Channels8:2 S/PDIF input mux (8 inputs RXP[7:0] select 2); hardware mode can select AES/SPDIF input; differential input supported
Recovered Clock JitterRMCK output clock jitter typ 200 ps RMS
5V Support (VL)Yes: VL logic interface supply +3.3V or +5.0V
Control InterfaceSoftware mode: SPI™ and I²C; hardware mode (pure pin configuration)
Output FormatSerial digital audio output; general output format supports left-justified / right-justified / I²S etc. (multi-bit, programmable bit clock & left/right clock polarity); supports AES3 direct output format (V/U/C bits readable)
PackageTSSOP28
Temp. Range-40°C ~ +85°C

Product details

Overview

The ST8416 is a CMOS monolithic receiver and decoder for digital audio signals, featuring an 8:1 input multiplexer and supporting IEC60958, S/PDIF, EIAJ CP1201 and AES3 audio interfaces with sample rates from 32kHz to 192kHz. The device integrates a serial digital audio output interface and supports both software and hardware configuration modes; channel status data is stored in on-chip registers for easy readout, and three GPO pins are programmable for various output states. An internal PLL recovers a clean clock from the AES3 data stream, with RMCK output clock jitter of only 200ps RMS typical, ensuring the clock purity required by high-fidelity audio links. Differential inputs are supported, compressed audio streams are detected automatically, and CD Q sub-code can be decoded, while the VL logic interface supply works with both +3.3V and +5.0V systems. Housed in a TSSOP28 package over -40℃ to +85℃, the ST8416 provides a complete S/PDIF/AES3 receive-and-decode solution for professional and consumer digital audio equipment.

Features

  • Compatible with IEC60958, S/PDIF, EIAJ CP1201 and AES3
  • Sample rate range: 32kHz to 192kHz
  • 8:2 S/PDIF input multiplexer; hardware mode AES/SPDIF input selection
  • Low-jitter clock recovery: RMCK jitter typ 200ps RMS
  • Flexible output formats: left-justified / right-justified / I²S with programmable clock polarities
  • AES3 direct output format with readable V/U/C bits
  • Software mode via SPI and I²C; hardware mode by pin configuration
  • +3.3V or +5.0V VL logic interface supply; differential input supported
  • On-chip status data registers; channel status and user data readable via pins
  • Automatic compressed-stream detection, CD Q sub-code decoding, 3 programmable GPOs
  • TSSOP28 package, -40~+85℃

Typical Applications

  • A/V receivers
  • CD-R and DVD players
  • Multimedia audio equipment
  • Digital mixing
  • Audio processors
  • Set-top boxes
  • Computer and automotive audio systems