Product image
Part number
Supply Voltage Range (VM)
Continuous Output Current Iout (per channel)
H-bridge Rds(on) (HS+LS)
PWM Frequency Range
Protection Features
Control Interface
Dead Time
Quiescent/Sleep Current (Iq/Isleep)
Fault Feedback Pin (nFAULT)
Package
Pull-down Resistor Rpd
Logic Input Voltage VIL/VIH
Other Features
ST85493.8~12V
1.5A (continuous) / 2.5A (peak)
350mΩ (typ), 450mΩ (max) @Io=500mA, 25℃; 530mΩ (typ), 700mΩ (max) @Io=500mA, 125℃
0~500kHz
OTP (155~180℃, hysteresis 18℃), under-voltage (3.64V, hysteresis 0.17V), short-circuit (VM/GND), over-current (3.0A); built-in LDO
PWM (IN/EN) input mode, 3.3V/5V logic compatible
-
Sleep mode <1µA (EN=0); normal operation 800~1000µA
None
SSOP10L (4.9×3.9, e=1.0)
108kΩ
VIL=1.28V, VIH=1.58V
ST85483.8~12V
1.5A (continuous) / 2.5A (peak)
350mΩ (typ), 450mΩ (max) @Io=500mA, 25℃; 530mΩ (typ), 700mΩ (max) @Io=500mA, 125℃
0~500kHz
OTP (155~180℃, hysteresis 18℃), under-voltage (3.64V, hysteresis 0.17V), short-circuit (VM/GND), over-current (3.0A); built-in LDO
PWM (IN/IN) input mode, 3.3V/5V logic compatible
-
Sleep mode <1µA (IN1=IN2=0); normal operation 800~1000µA
None
SSOP10L (4.9×3.9, e=1.0)
108kΩ
VIL=1.28V, VIH=1.58V
ST6208Digital/Analog supply 3.3V, motor supply VDD5/MVCC 5V (typ)
DC motor 0.3A, STM stepper motor 0.8A (Absolute Maximum Ratings)
DC (OUT H-bridge) 2.0Ω (typ)/3.0Ω (max), STM 1.5Ω (typ)/2.5Ω (max) @Io=100mA
Internal PID/SPI control (no external standard PWM)
OTP (155~180℃, hysteresis 26℃), Under-voltage lockout UVLO1(2.27V)/UVLO2(2.20V)
SPI serial control (PID); built-in Iris DC motor driver + 2-ch STM stepper driver
-
Standby current VDD5 <10µA (RSTB=1); MVCC standby <2.0µA
None
LGA44 / QFN44 (6×6, e=0.4)
LED Drivers: 2x open-drain, On-resistance 5Ω
ST39093.8~12V
1.5A (continuous) / 2.5A (peak)
350mΩ (typ), 450mΩ (max) @Io=500mA, 25℃; 530mΩ (typ), 700mΩ (max) @Io=500mA, 125℃
0~500kHz
OTP (155~180℃, hysteresis 18℃), under-voltage (3.64V, hysteresis 0.17V), short-circuit (VM/GND), over-current (3.0A); built-in LDO
PWM (IN/IN) input mode
-
Sleep mode <1µA (IN1=IN2=0); normal operation 800~1000µA
None
SSOP10L (4.9×3.9, e=1.0)
108kΩ
VIL=1.28V, VIH=1.58V
ST39011.2~6V
1.2A (continuous) / 2.3A (peak)
420mΩ (typ), 600mΩ (max) @Io=500mA, VCC=5V
0~250kHz
Over-temperature protection (TSD:150~180℃, hysteresis 30℃)
PWM (IN/IN) input mode
-
Sleep mode <1µA (IN1~IN4=0); normal operation 200~550µA
None
DFN10 (3mm×3mm, e=0.5)


